LED tubes

Reducing energy consumption of lighting systems, and thus the cost of lighting nowadays is the number-one topic. While the specific power of conventional fluorescent lamps with T8 inductive ballast is usually to 75lm/W, with electronic ballast 85 lm/W and LED replacement lamps offer currently values over 120lm/W. Select the new technology it is possible, with the same luminous flux running consecutively from light sources, save up to 30 % in electricity costs.The lifetime of LED tubes, unlike fluorescent lamps , is independent of the switching frequency. Increase in luminous flux at the operating level is very rapid and is accompanied by blinking start. This makes it possible to use LED lamps in combination with motion sensor (eg, corridors, and public spaces).

Unlike conventional fluorescent LED tubes radiate from the whole surface, but only in a half-space. Most products have a beam angle of 120°. In the fixtures because there are fewer reflections, which can have a positive impact on their overall effectiveness. This also increases the maintenance factor, because the purity of the reflecting surfaces lamps have less effect on light output.

Simply replace conventional T8 fluorescent lamps. LED tubes retain their shape and a base for their operations do not need a starter or ballast. LED bulb lights at full power immediately after power-on, and not blinking or some noise. Huge life and robust construction determines the LED lamps for extreme conditions. The lower temperature additionally diminishes light output, as in conventional fluorescent lamps , but rather contributes to a better cooling of the chips, thus helping to better functioning of the tube. They are safe for you and the environment-is free of harmful mercury and broken glass shards does not.